Epomaker Zebra
Hear it
Real single-key recording on GMK MT3 / SA keycaps. Want to add plate, case & mods? Open the live simulator →
Specifications
| Type | Tactile |
|---|---|
| Sound character | Thocky |
| Loudness | -25.3 dB |
| Pitch | 2,814 Hz |
| Spring weight | 63.2 g |
| Actuation force | 38.3 g @ 1.9 mm |
| Bottom-out force | 81.1 g @ 3.9 mm |
| Tactile bump | 54 g @ 1.47 mm |
Sound profile
Force curve
Modeled from the measured actuation, bottom-out and tactile-bump values above.
About this switch
The Epomaker Zebra is a tactile switch with a heavy 63.2g spring. It actuates at 38.3g after 1.9mm of travel and bottoms out at 81.1g over a 3.9mm stroke, with a tactile bump peaking around 54g at 1.47mm.
Measured at -25.3dB, it's louder than 92% of the 195 switches measured on ThockHub, giving it a thocky character at roughly 2,814Hz. Its 63.2g spring is heavier than 65% of switches in the database, so it feels deliberate and controlled under the finger.
Use the player above to hear the Epomaker Zebra on its own, then open it in the live simulator to layer in your plate, case, keycaps and mods.
Similar tactile switches
Build the full sound
Hear the Epomaker Zebra with your plate, case, keycaps and mods in the live simulator.
Open the simulator →