Epomaker Wisteria Tactile
Hear it
Real single-key recording on GMK MT3 / SA keycaps. Want to add plate, case & mods? Open the live simulator →
Specifications
| Type | Tactile |
|---|---|
| Sound character | Balanced |
| Loudness | -25.2 dB |
| Pitch | 3,025 Hz |
| Spring weight | 66.5 g |
| Actuation force | 42.8 g @ 2 mm |
| Bottom-out force | 76.9 g @ 3.9 mm |
| Tactile bump | 59 g @ 1.65 mm |
Sound profile
Force curve
Modeled from the measured actuation, bottom-out and tactile-bump values above.
About this switch
The Epomaker Wisteria Tactile is a tactile switch with a heavy 66.5g spring. It actuates at 42.8g after 2mm of travel and bottoms out at 76.9g over a 3.9mm stroke, with a tactile bump peaking around 59g at 1.65mm.
Measured at -25.2dB, it's louder than 93% of the 195 switches measured on ThockHub, giving it a balanced character at roughly 3,025Hz. Its 66.5g spring is heavier than 77% of switches in the database, so it feels deliberate and controlled under the finger.
Use the player above to hear the Epomaker Wisteria Tactile on its own, then open it in the live simulator to layer in your plate, case, keycaps and mods.
Similar tactile switches
Build the full sound
Hear the Epomaker Wisteria Tactile with your plate, case, keycaps and mods in the live simulator.
Open the simulator →